What should I do if the material is sticky, wet, easy to clump, and block the net when screening?

When the vibrating screen is in normal operation, due to the various characteristics of the material, the shape of the material will cause various forms of screen hole blockage. After analysis, the main reasons are as follows: 　　 1. The size of a large amount of material is as big as the sieve hole; 　　 2. The material has high moisture content; 　　 3. Spherical particles or materials with multiple contact points block the network; 　　 4. Static electricity will occur; 　　 5. The material has fibrous components; 　　 6. There are more flaky particles; 　　 7. The wire diameter of the woven screen is too thick; 　　 8. For thicker screens such as rubber screens, the hole shape design is unreasonable, and the holes have no taper, which causes the particles to get stuck.